Posts Tagged ‘pcb’
and all of the images in the set
(It’s all on 1 page, w/o extras of forced annoying advertising, besides what hosting site may choose to do…)
Goal(s):
The reason behind this project was to see how the Digi’s Xbee modules work, and to figure out how to have the remote modules’ inputs read on another module. The local / receiving …..
(the modeling shot)
Basically, an idea is to allows up to 7 devices, in this case (inputs or outputs, don’t matter), to be plugged in and to have them criss-cross connected across ‘busses’, to route the audio signal inputs to desired outputs. The goal is to have a remote, pc, or manual over-ride controlled source/destination bussed audio selector matrix.
Say, you have …..
This is a project that I did a while back that I never really documented for some reason… Well here it is! the modified Epson PCB printer!
So I went to my local Futureshop (Canada FTW!) and picked up the only clearance Epson they had… No need to buy the extended warranty here!
Brand new:
After taking off all “Unnecessary” parts:
I removed the …..
So now, I am starting to really like HackHut… Quite a nifty little hackblog tool.
My newest project is a large vertical POV display. Think this but taller. Currently, I am working on the AVRmega168 controller board that will power through all the data to render it.
So far, so good, I have already placed the DigiKey order, it is to arrive …..
Once I’m finished prototyping the electronics for the arduimometer, I’m going to design a custom PCB and use the DIY method with Ferric Chloride (FeCl3) and a single sided copper clad board to create the PCB.
I just ordered some Ferric chloride solution, some copper clad boards, and some Datak tin plate from Electronics Express. I’ve heard good things about them …..
Video of the car toy on youtube
This project is the proof of concept number 3 of the DCC (Direct Control Console) I’ve developped to enable a direct control of Arduino via a serial interface.It is a modified model muscle car equipped with 4 servos to adjust the height of each wheels according to the data received …..
